There was a problem loading the comments.

How to connect your Sign-in App Printer

Support Portal  »  Knowledge Base  »  Viewing Article

  Print

Connect a Printer to your Sign-In App

This guide is for sites who have the sign-in system installed onsite. 

Supported Printers 

Sign In App supports the following Brother label printers:

  • QL-710W (Wi-Fi only)
  • QL-720NW (Ethernet and Wi-Fi)
  • QL-810W (Wi-Fi only)
  • QL-820NWB (Ethernet, Wi-Fi and Bluetooth)

If this is the first time you are connecting your printer, please contact our installations team for extra assistance or onsite support. – AIT Team 

Brother Printer QL-820NWB only

Brother’s QL-820NWB Printer also supports Bluetooth. To connect the QL-820NWB to Sign In App via Bluetooth, it must first be paired with the iPad. On the printer, navigate to the Bluetooth options and make sure Bluetooth is switched on.

On the iPad, open Settings and select Bluetooth. Switch Bluetooth on if it isn’t on already and the QL-820NWB should appear in the list of Other devices. This can take a moment to search.

Tap on the QL-820NWB and after a few moments it should move to the My devices section. The printer is now connected.

While Bluetooth is a quick and easy way to connect the printer to the iPad, Bluetooth only supports one connection at a time. As a result Bluetooth is not suitable for receptions with multiple iPads connected to the same printer. To connect multiple iPads to the same printer, use either a Wi-Fi or wired connection.

Wi-Fi (QL-710W, QL-720NW, QL-810W, QL-820NWB)

To connect a compatible Wi-Fi printer to your network, use the Brother software that was provided with the printer. This can also be downloaded from Brother’s website using the links below:

For Windows, download BRAdmin Pro from the downloads page. For Mac, download Wireless Device Setup Wizard from the downloads page.

WPS

If you have a router with WPS capability, press the WPS button on the router, followed by the WPS button on the printer. Please note this will not assign a static IP address.

QL-820NWB

The QL-820NWB has an LCD display which allows you to configure basic wireless settings on the device without additional software.

Static IP

To ensure the printer remains connected to the iPad at all times, we recommend assigning a static IP to the printer. If you do not set a static IP, the Sign In App will need to be reconnected to the printer each time a new IP address is assigned.

Ethernet

(QL-720NW, QL-820NWB)

A wired Ethernet connection is the preferred option for sites with poor, limited or restricted Wi-Fi. The printer and iPad must be on the same network, so for environments with separate wired and wireless networks, you may need to configure the printer with wireless even when a wired connection is available.

Static IP

To ensure the printer remains connected to the iPad at all times, we recommend assigning a static IP to the printer. By connecting the printer via Ethernet, it will automatically be assigned an IP address by DHCP. If you do not set a static IP, the Sign In App will need to be reconnected to the printer each time a new IP address is assigned.

Turning off template mode (QL-820NWB Only) – Recommended

Brother’s QL-820NWB has a mode enabled as standard which can interfere with the smooth operation of Sign In App, so we recommend you turn this mode off as soon as you can. To turn off Template Mode, press the Menu button on the printer, then use the up or down arrow keys to cycle through until you reach Template Settings. Press OK and then scroll to select Template Mode. Use the arrow keys and OK button to set this to OFF and use the Menu button to return to where the date and time are shown.

Add  the printer – Searching for a printer

With the printer configured, the next step is easy.

Open Sign In App on the iPad if it isn’t already open. From the config screen (shown below), tap Select printer to open the printer menu.

Printer search

Tap Add a Bluetooth printer to see a list of the available Bluetooth printers. Select Add a network printer to see the available network printers, you can also enter your IP address manually from here.

Tap the printer you wish to connect to and that’s it, Sign In App will now print your visitor badges to this printer. To remove the printer at any time, simply select Don't use a printer.

Enter IP address manually

If your network prevents discovery of printers via a search, you can manually enter the IP address by selecting this option. You need to select the correct printer model and both the printer and the iPad must be on the same network.


Share via

Related Articles

© Advanced IT Services