If the machine is on, press the power button again to turn it off.
Hold the F10 button at the top of your keyboard.
Whilst holding F10, press the power button to turn on the laptop.
The laptop should enter a light blue menu, once the laptop starts beeping release the F10 key.
Once the machine stops beeping, use the left and right arrow keys to navigate to [No] and press enter to select it.
Now press the right arrow key twice, to navigate to the System Configuration tab and use the down arrow to get down to Boot Options.
Press enter to open Boot Options and use the down arrow key to navigate down to Legacy Support and press enter to open a new menu.
Press the down arrow key and then press enter to select Enabled. This will then ask you to confirm. Press the left arrow key and then press enter to confirm [Yes].
Now press F10 and then press Enter.
The machine should boot into a screen that will ask you to type a code, type in this code and press enter.
The machine should now boot into Windows.
