There was a problem loading the comments.

Checking the status of a UniFi access point

Support Portal  »  Knowledge Base  »  Viewing Article

  Print

Please see below the status of your UniFi access point if you suspect issues are arising from an access point that may be malfunctioning or offline:

 

Flashing White / Off Every 1/2s
The device is initializing and booting up.

 

UAP-AC-1-Initializing.gif

 

Steady White
The device is ready for adoption.

 

UAP-AC-2-Factory-Defaults.gif

 

Steady Blue
The device is adopted and is in normal operating mode. Access Point is broadcasting WiFi.

 

UAP-AC-4-Adopted.gif

 

Strobing White / Off
If this happens, power cycle the Access Point.

 

UAP-AC-9-Error-A12.gif

 

Quickly Flashing White / Blue
The device firmware is currently being upgraded - do not interrupt the process.

 

UAP-AC-7-Firmware-Upgrade.gif

 

Blue and Flashing Off Every 5s
Access Point has lost network connectivity and is searching for a wireless uplink.

 

UAP-AC-5-Isolated.gif

LED Off
The device is offline.

 

UAP-AC-8-LED-Off.gif


Share via

Related Articles

© Advanced IT Services